Insulated & Non-Insulated

Commercial Sectional and Overhead Doors in Cedar Park and Greater Austin

The sectional overhead door is the workhorse of a commercial building. It is the door on your warehouse, your shop bay, your distribution dock, and your service garage, and when it is slow, drafty, or down, it costs you every day. Squared Away installs and services commercial sectional and overhead doors across Cedar Park, Round Rock, Georgetown, Austin, and the wider Greater Austin area, sized and specified for the way your building actually runs.

We handle the full range: insulated and non-insulated steel sectional doors; wind-load-rated doors for code compliance; glass and aluminum vision doors for showrooms and service bays; and commercial sizes up to 14 feet tall. Whether you are outfitting a new building, replacing a door that has reached the end of its life, or keeping a fleet of overhead doors running, you get one local team, honest specs, and Net 30 terms for commercial accounts.

Commercial sectional and overhead doors are a specialty here, not a sideline. The owner has years of hands-on experience engineering and installing these doors for warehouses, apartment communities, and shops across Central Texas, so you get the right door and the right hardware the first time. Start with a free on-site assessment and a straight quote.

Insulated & Wind-Load OptionsDoors Up to 14 FeetInstall & RepairNet 30 for AccountsLicensed & InsuredAny Brand You Need
Commercial Sectional and Overhead Doors in Cedar Park and Greater Austin
5.0★Google
Rated
Squared Away garage door service in Cedar Park, TX

Squared Away

Three Things the Right Commercial Door Gets You

A commercial sectional door is not just an opening. Speced right, it lowers your costs, keeps your building to code, and stops becoming a maintenance headache. Here is what that looks like.

Lower energy bills in the Texas heat

An insulated sectional door with a real R-value keeps conditioned or shaded space from bleeding out through a big steel opening. In Central Texas heat, an uninsulated warehouse or shop door can turn the whole building into an oven and run up the cooling bill. We help you choose the right insulation tier, polystyrene or polyurethane, for how the space is used.

Code compliance and wind-load ratings

More jurisdictions and more commercial specs call for wind-load-rated doors. We install Amarr wind-load rated doors and high-wind reinforcement so your door meets the code that applies to your building, and we tell you honestly when a rating is required versus when it is optional.

A door that keeps running, not a recurring problem

The right door with the right hardware and a maintenance plan is a door you stop thinking about. We size the springs and hardware for your cycle count, install it correctly, and can put it on a per-door maintenance program so a busy commercial door does not fail mid-shift.

Squared Away

Commercial Sectional and Overhead Doors We Install and Service

Whatever your building runs, we can spec, install, and service it. Here is the range.

Options and upgrades

  • Insulation tiers with real R-values, matched to Texas heat and how the space is used
  • Vision and glass sections for daylight and visibility
  • High-wind reinforcement to meet local wind-load code
  • Commercial operators and openers, sized for the door
  • Heavy-duty springs, cables, rollers, and tracks rated for your cycle count
  • Insulation kits added to existing doors, priced per door
  • Track and lift configurations for tight buildings: standard lift, high lift, low headroom, and full vertical lift, matched to your ceiling height and any overhead storage

Door types

  • Insulated steel sectional doors, polystyrene or polyurethane, for conditioned or high-heat spaces
  • Non-insulated steel sectional doors for warehouses, storage, and utility openings
  • Wind-load rated sectional doors for code compliance
  • Glass and aluminum vision doors for showrooms, service bays, and modern storefronts
  • Commercial overhead doors up to 14 feet tall for high-bay and warehouse openings
  • Heavy-duty and commercial-grade hardware and upgrade kits

Installation and repair, we cover

  • New commercial sectional and overhead door installation for new buildings and replacements
  • Panel and section replacement without replacing the whole door, where possible
  • Spring, cable, roller, track, and hardware repair on commercial doors
  • Operator and motor installation and repair
  • Emergency repair for a down commercial door
  • Loading dock doors: we handle the door itself and refer out for levelers and seals

Squared Away

Buildings and Industries We Outfit

Commercial sectional and overhead doors appear in many different buildings. These are the ones we work in most across Greater Austin.

  • Warehouses and distribution centers
  • Auto shops, service bays, and fleet garages
  • Manufacturing and light industrial buildings
  • Self-storage and mini-storage facilities
  • Retail and showroom back-of-house
  • Apartment communities and multi-family parking structures
  • Municipal, fire, and public-works buildings
  • Contractor yards and equipment storage
Squared Away garage door service in Cedar Park, TX

Squared Away

How a Commercial Door Installation or Replacement Works

A commercial door project should be predictable, speced right, and easy to budget. Here is how we run it start to finish.

Free on-site assessment

We come out, measure the opening, and look at how the building actually runs: cycle count, heat load, wind-load requirements, headroom, and the operator. Getting the spec right on site is what keeps a commercial door from being the wrong door.

A clear spec and a straight quote

You get a written quote that lays out the door, insulation tier, wind-load rating (if applicable), hardware, and operator, with the price before any work begins. Commercial accounts run on Net 30, and we are happy to respond to a formal RFP or spec.

Ordering and lead time

Most commercial doors run about two to four weeks from order, depending on the door and any custom sizing. We give you a realistic lead time up front and keep you posted, so the door lands when your project needs it.

Professional installation

We install the door, size and set the springs and hardware for your cycle count, mount and program the operator, and make sure the door runs true. On a replacement, we remove and haul off the old door.

Safety test and walkthrough

We test the door, operator, and safety systems, walk your team through operation and any manual release, and confirm the door meets commercial safety standards before we leave.

Documentation and maintenance

We document the install for your records, provide warranty details, and can put the door on a per-door maintenance program so it keeps running and you are not calling us for an avoidable emergency.

Straightforward Pricing

Straightforward Commercial Door Pricing

Published Starting PricesUpfront • Flat-rate
  • Free on-site assessment and written quote for any commercial door installation
  • Insulation kit added to an existing doorabout $450 per door
  • Insulation upgrade optionsroughly $300 to $700, depending on the door and tier
  • Wind-load rated door and reinforcement workquoted per opening, typically $125 to $3,000 depending on scope
  • Storm or vehicle-impact board-up to secure an openingfrom $250
  • Commercial repairservice call from $250, applied to the work
  • Net 30 terms for commercial accounts
  • Itemized quotes and invoices for your records
  • Certificate of insurance kept on file
  • We respond to formal RFPs and written specs
  • Per-door maintenance programfrom $89 per door per year
No hidden fees. The price is confirmed before any work begins.

Commercial door pricing depends on the size, insulation, wind load rating, and hardware, so most installations are quoted after a free on-site assessment. Here is where we can give you real numbers up front.

Why installation pricing is quoted, not listed

A 14-foot insulated, wind-load-rated warehouse door and a small non-insulated storage door are not the same purchase, so a single sticker price would only mislead you. We measure the opening, confirm what the code and the building need, and give you a firm written number before anything is ordered.

Get Your Free Estimate: (512) 456-3781

5.0 Google Rated

Honest Specs, Quality Work

★★★★★

Walked us through insulated versus non-insulated

“We had a 10/10 experience with Squared Away Garage Door Service. They are very professional, knowledgeable, and courteous. Eric took the time to answer our questions about door options, styles, insulated vs. non-insulated and installation logistics. Their team does not try to sell you a garage door for the sake of selling, they make sure you’re comfortable with your choices before proceeding. We especially appreciated their quality customer service from start to finish. We had an issue with the door after install and they came out the very next day to make the necessary adjustments. We highly recommend Squared Away Garage and we are so happy to have worked with them for ours.”

P.T. R., verified 5-star Google review, January 2026.

★★★★★

Quality of work was excellent, no upselling

“I highly recommend Squared Away Garage Door Service! Eric was an absolute pleasure to work with from start to finish. He showed up right on time and got straight to work with great professionalism and a strong work ethic. The quality of work was excellent, you can tell Eric takes real pride in what he does. Pricing was fair and transparent, with no surprises or upselling, which I really appreciated. What stood out most, though, was Eric’s honesty. In a business where it’s easy to take advantage of customers who don’t know much about garage doors, Eric was straightforward and upfront every step of the way.”

Ashish C., verified 5-star Google review, June 2026.

The Difference

Feature

Feature
Squared Away
National Suppliers / Big-Box
Who Specs the Door
A local owner who engineers and installs commercial doors
A salesperson working off a catalog
On-Site Assessment
Free, measured, and matched to how the building runs
Often a phone quote or a subcontractor visit
Insulation Guidance
Real R-value tiers matched to Texas heat
Whatever is on the order form
Wind-Load Compliance
Honest about when a rating is required or optional
Upsold or skipped, depending
Brand Flexibility
Any brand your spec calls for, plus CHI dealer
Locked to one supplier line
Install Quality
Springs and hardware sized for your cycle count
One-size hardware, hurried install
Terms
Net 30 for commercial accounts
Prepay or credit application common
Lead Time Honesty
A realistic date up front, kept updated
Optimistic date, quiet delays
Repair After Install
The same local team services what it installs
Handed to a call center or a sub
Accountability
The owners answer the phone
You are an order number

Central Texas Conditions

Why Central Texas Shapes the Right Commercial Door

A lot of what makes a commercial door the right or wrong choice here is specific to Central Texas. This is what we factor into every spec.

Heat and the case for insulation

Central Texas summers are long and brutal, and a big, uninsulated steel door turns a warehouse or shop into a heat sink. An insulated sectional door with the right R-value keeps the space workable and cuts the cooling load, which is why we walk every commercial buyer through the insulation tiers rather than defaulting to the cheapest panel.

Wind-load code across jurisdictions

Wind-load requirements vary by jurisdiction across the Austin metro, and more commercial specs are calling for rated doors. We know when a rating is required for your building and install Amarr wind-load-rated doors and reinforcement to meet it, so your project passes inspection on the first try.

Storms, hail, and impact

Central Texas storms hit commercial buildings hard, and hail and wind damage panels, while vehicle impact bends a dock or shop door. We spec durable doors, handle storm and impact repair, and can secure or board up an opening fast so a damaged door does not leave your building exposed.

High-cycle wear on busy doors

Commercial doors cycle far more than residential doors, and heat accelerates wear on springs and operators. We size the counterbalance and hardware for your real cycle count so a busy warehouse or shop door lasts, rather than installing residential-grade parts that fail early.

Dust and grit in industrial yards

Industrial parks and contractor yards throw dust and grit that pack into tracks and rollers and wear a door out early. We account for the environment in the hardware we choose and in the maintenance plan we recommend.

Growth and aging buildings

As the area grows, a lot of buildings are outgrowing the doors and the vendor that installed them. We regularly replace end-of-life commercial doors and take over service for properties whose original installer is slow, gone, or no longer local.

The Details

What Does Speccing a Commercial Sectional Door Right Take

A commercial sectional door is a bigger, harder-working machine than a house door, and getting it right takes more than reading a size off a tape. Here is the depth behind it.

01
01

Insulation, R-value, and how the space is used

Polystyrene and polyurethane insulation carry different R-values and different price points, and the right choice depends on whether the space is conditioned, how much heat load the opening carries, and the budget. We match the insulation tier to the building's actual use rather than selling the same panel to everyone, so you get energy savings without overpaying.

02
02

Wind-load engineering and code

A wind-load-rated door is engineered with reinforced sections, bracing, and rated hardware to withstand design wind pressure, and it must be installed to that spec to count. We know which jurisdictions require it, install rated Amarr doors and reinforcement correctly, and document it so the door passes inspection.

03
03

Sizing springs and hardware to cycle count

The difference between a commercial door that lasts and one that fails early is whether the counterbalance and hardware were sized for how often the door runs. A door cycling hundreds of times a day needs high-cycle springs and heavy-duty hardware, and we size them to your real usage rather than defaulting to residential parts.

04
04

Doors up to 14 feet and high-bay openings

Tall commercial doors, up to 14 feet here, carry more weight and more wind area, which changes the spring, track, and reinforcement requirements. Handling that height correctly is a specialty, and it is one the owner has built directly through years of commercial sectional work across Central Texas.

05
05

Glass and vision sections done right

Aluminum and glass vision doors bring daylight and a modern look to showrooms and service bays, but the glazing and frame have to be speced for the setting and the security needs. We install quality aluminum and glass systems and steer customers away from the cheap import glass that fails and yellows.

06
06

Matching the operator to the door

A commercial door and its operator are a system. A heavy or high-cycle door needs the right jackshaft or hoist operator, sized and wired correctly, or the door and the motor both wear out early. We match the LiftMaster commercial operator to the door and the duty, which is covered in depth on our Commercial Door Operators page.

07
07

Lead time, logistics, and the RFP

Commercial projects run on schedules and specs. We give a realistic lead time, coordinate with your build or turnover timeline, respond to formal RFPs, and keep a certificate of insurance on file, so the door is one less thing that slips on your project.

Squared Away garage door service in Cedar Park, TX
Squared Away garage door service in Cedar Park, TX

FAQ

Commercial Sectional and Overhead Door Questions We Hear

What size commercial sectional doors do you install?

+

We install commercial sectional and overhead doors up to 14 feet tall, sized to your opening. We measure on-site and spec the door, springs, and hardware for the height and the cycle count, so a tall high-bay door is engineered correctly rather than fitted with residential-grade parts.

Should I get an insulated or non-insulated commercial door?

+

It depends on how the space is used. If the building is conditioned or you want to cut the Texas heat load, an insulated door with the right R-value pays for itself in comfort and energy. For an unconditioned warehouse or storage opening, non-insulated may be the right call. We walk you through the tiers, polystyrene and polyurethane, at the assessment.

Do you install wind-load-rated doors?

+

Yes. We install Amarr wind-load-rated doors and high-wind reinforcement to meet code requirements where your jurisdiction requires them. We will tell you honestly whether a rating is required for your building or optional, so you are not paying for a rating you do not need or skipping one you do.

What brands of commercial doors do you install?

+

We install whatever brand your spec or property calls for, and we are a CHI Overhead Door dealer. On the residential side, we regularly install Amarr, Clopay, DoorLink, and other major brands. Commercial doors are matched to the job, so you are not locked into one line.

Do you offer glass and aluminum commercial doors?

+

Yes. We install aluminum and glass vision doors for showrooms, service bays, and modern storefronts. We use quality systems and steer customers away from the cheap imported glass that fails and discolors.

How much does a commercial sectional door cost?

+

Install pricing depends on the size, insulation, wind-load rating, and hardware, so we quote it after a free on-site assessment. We can price some items up front: an insulation kit runs about $450 per door, insulation upgrades roughly $300 to $700, and wind-load work typically $125 to $3,000, depending on scope. You get a firm written number before anything is ordered.

How long does it take to get and install a commercial door?

+

Most commercial doors run about two to four weeks from order, depending on the door and any custom sizing. The install itself is usually a day or less once the door is on site. We give you a realistic lead time up front and coordinate with your project schedule.

Do you offer Net 30 for commercial accounts?

+

Yes. Commercial accounts run on Net 30, with itemized quotes and invoices, and a certificate of insurance kept on file. We also respond to formal RFPs and written specs.

Can you replace just a damaged panel instead of the whole door?

+

Often yes. If the door is otherwise sound and the panels are still available, replacing the damaged section is usually cheaper than a full door. If the door is at the end of its life or the panel is discontinued, we will tell you honestly and quote a replacement.

Do you service the door after you install it?

+

Yes. The same local team that installs your door services it. We offer per-door maintenance programs from $89 per door per year and 24/7 emergency repair for a down commercial door, so you have one accountable vendor for the life of the door.

Do you install the operator with the door?

+

Yes. We match and install the commercial operator, usually LiftMaster, sized and wired for the door and the duty cycle. Operators are covered in depth on our Commercial Door Operators page.

Can you set the door up for a low ceiling or extra overhead storage?

+

Yes. Commercial openings do not all have standard headroom, so we spec the track and lift for your building: standard lift, high lift, low headroom, or full vertical lift, depending on your ceiling height and whether you need clear space above the door. We work that out during the on-site assessment, so the door fits the building rather than forcing the building to fit the door.

What are the spring options on a commercial door?

+

We size the counterbalance according to how often the door runs. A door that cycles a few times a day is fine on standard springs, while a busy warehouse or shop door that runs hundreds of times a day needs high-cycle springs and heavy-duty hardware to last. Matching the spring to your real cycle count is what keeps a commercial door from failing early.

Do you install fire-rated doors?

+

Yes. Fire-rated door assemblies carry special listings and code requirements, so we handle them through our specialist technician. Along with fire-rated doors, we cover high-speed doors and dock levelers, plus the rest of your commercial doors, insulated, wind-load, sectional, and overhead, on the same project.

Do you handle loading dock doors?

+

Yes, we handle the dock door itself, sectional or rolling steel, along with its springs, cables, tracks, and operator. For dock levelers, seals, and bumpers, we handle the door side and can point you to the right specialist for the leveling equipment.

Squared Away garage door team serving Cedar Park and Greater Austin, TX
Based in Cedar Park

Squared Away Garage Door Service

1320 Arrow Point Dr, Ste 501, Cedar Park, TX 78613

Same day

On most repairs

24/7

Emergency response

Service Area

Serving Cedar Park & Greater Austin

Based in Cedar Park and serving Round Rock, Georgetown, Pflugerville, Leander, Austin, Hutto, Brushy Creek, Manor, Taylor, and commercial and industrial properties throughout the Greater Austin area.

Cedar Park & Greater Austin
Squared Away garage door team, Cedar Park, TX

Ready to Spec the Right Commercial Door?

Whether you are outfitting a new building, replacing an end-of-life door, or keeping a fleet of overhead doors running, Squared Away gives you honest specs, quality installation, and one local team that services what it installs. Start with a free on-site assessment and a straight quote, on Net 30 terms. Back to all commercial services -> /commercial-garage-door-services Related Commercial Services Commercial Door Operators -> /commercial-door-operators Commercial Repair & 24/7 Emergency -> /commercial-garage-door-repair Rolling Steel & Curtain Doors -> /commercial-rolling-steel-doors Commercial sectional and overhead doors, speced right and installed by a local team, on Net 30 terms. Call (512) 456-3781.

Emergency service: 24 hours a day, 7 days a week · Standard hours 8 a.m. to 6 p.m. · Calls answered around the clock