Safer & Quieter | Better Balanced | Longer-Lasting | Free Assessment | 5.0 Google Rated
Extension-to-Torsion Spring Conversion in Cedar Park and Greater Austin
If your garage door uses extension springs, the long springs that stretch along the tracks on either side, you have an older, less safe setup than most modern doors. Converting to a torsion system, where a spring on a shaft above the door does the work, makes the door safer, quieter, better balanced, and longer-lasting. Squared Away performs extension-to-torsion conversions across Cedar Park, Round Rock, Georgetown, and the wider Austin area.
We are a local, family-run team, not a national installer, so you get an honest assessment of whether your garage has the headroom for a conversion, a clean install of the new torsion hardware, and a firm price up front. If you have a Wayne Dalton TorqueMaster system, we convert those to standard torsion too.
Get a Free Conversion Assessment: (512) 516-3718
Rated
Why Homeowners Choose Squared Away
Why Convert to Torsion
Safer When It Fails
Torsion springs are contained on a shaft, not flung across the garage.
Quieter and Smoother
A torsion system runs more quietly and evenly.
Better Balanced
Torsion holds the door's weight more precisely, easing the opener.
Longer Lifespan
Torsion springs typically outlast extension springs.
Squared Away
The Conversions We Perform
Most extension-spring doors can be converted to torsion springs, and we handle common situations.
Standard extension-to-torsion conversion
We remove the extension springs, pulleys, and safety cables and install a torsion shaft, springs, drums, and cables above the door, sized to your door's weight. The result is a modern torsion system on your existing door.
Wayne Dalton TorqueMaster conversion
Wayne Dalton's TorqueMaster system encloses the spring inside the tube, which can be harder to service and prone to specific failures. We can repair a TorqueMaster or convert it to a standard exposed torsion system that is easier and cheaper to service down the road.
Low-headroom and high-lift situations
A torsion conversion needs enough headroom above the door for the shaft and springs. Where headroom is tight, we offer low-headroom torsion kits and other options, and we assess what your garage can take before we quote.
Sized and balanced to your door
As with any spring work, the new torsion springs are sized to your door's exact weight and wound to balance it, then tested, so the converted door runs the way a torsion door should.
Squared Away
When an Extension-to-Torsion Conversion Makes Sense
A conversion is worthwhile on most older extension-spring doors, but a couple of factors decide whether and how it is done. Here is what we look at.
You have the headroom
A torsion shaft mounts above the door, so it needs a few inches of clearance above the opening. Most garages have it; where headroom is tight, a low-headroom torsion kit can often still work. We measure the clearance before we quote the conversion.
Your door is worth keeping
A conversion upgrades the spring system on your existing door, so it makes the most sense when the door itself is in good shape. If the door is also worn out, it is sometimes better value to replace the whole door, which comes with a modern torsion system already. We will tell you which way the math points.
You want the safety and the quiet
If an aging extension system worries you, or the door is noisy and jerky, the conversion delivers a real, noticeable improvement in safety, smoothness, and quiet. For many homeowners, that alone is worth it.
Central Texas Conditions
Why a Torsion System Holds Up Better in Central Texas
The same heat and heavy use that wear out springs here also make the sturdier torsion system the smarter long-term setup.
Torsion handles heat and heavy use better
Central Texas heat and thermal cycling are hard on any spring, but a torsion system is generally more durable and easier to fit with a longer-life high-cycle spring. On the heavy two-car doors common on newer Greater Austin homes, torsion is simply the better-suited system.
Easier to service for years to come
A standard exposed torsion system is straightforward for any competent technician to service and to upgrade with high-cycle springs, whereas older extension and enclosed TorqueMaster systems can be fussier and pricier to maintain. Converting now makes every future service simpler.
Squared Away
We Handle Every Spring System, Not Just Conversions
A conversion is one option among several. If your extension springs simply need replacing and a conversion is not the right call, we can do that too. We service torsion, extension, and TorqueMaster systems alike. We match the fix to your door and budget rather than pushing a single path.
And a spring system rarely wears alone. On the same visit, we check the cables, drums, bearings, and rollers, so the converted or repaired door runs right and does not send you back for a second issue soon after.
Squared Away
Why Choose Squared Away for a Spring Conversion
A conversion changes the heart of how your door works, so the assessment and the install matter. Here is what you get with us.
Honest about whether to convert
We will tell you plainly whether a conversion, a simple spring replacement, or a whole new door is the best value for your situation, rather than steering you to the biggest job.
Sized and balanced correctly
The new torsion springs are sized to your door's exact weight, wound to balance it, and then tested, so the converted door runs the way a proper torsion door should.
Local, stocked, and accountable
We are a Cedar Park shop with the hardware on the truck; we back the work with a warranty on parts and labor, and the owners answer the phone.
A safer, quieter door
The whole point of the conversion is a door that is safer when a spring eventually fails, quieter day-to-day, and easier to service for years, and that is what we deliver.
Straightforward Pricing
Conversion Pricing and Warranty
An extension-to-torsion conversion is more involved than a straight spring replacement, since it adds the torsion shaft, bearings, drums, and cables, and is quoted by your door and set up after a free on-site assessment rather than as a flat price. You approve the written estimate before any work begins, with no surprise charges.
Estimates are free with no trip charge, and for a larger job, Wisetack financing is available on projects over $1,500. We back the conversion with a warranty on parts and workmanship, and we go over the terms with your written estimate.
5.0 Google Rated
What Neighbors Say About Their Spring Work
These are verbatim, verified 5-star Google reviews from local customers across the Greater Austin area.
Tune-up, full inspection, no pressure
“Jason and Luke came out to provide a tune up for my garage that was very squeaky. They resolved that and also provided a full inspection on both my doors. They were very professional and knowledgeable and showed me where I will need some work in the future without being pushy. Very happy with their overall service!”
Dan Bednarsky, verified 5-star Google review, 2025.
Knowledgeable, friendly, recommended
“Very knowledgeable and friendly I would definitely recommend to anyone who needs the work done on their garage.”
Kenneth Tuel, verified 5-star Google review, 2025.
The Difference
A Torsion System vs. an Extension System
How a converted torsion system compares to the old extension setup it replaces.
FAQ
Extension-to-Torsion Conversion Questions We Hear
What is an extension-to-torsion conversion?
+
It is upgrading your garage door from extension springs, the long springs that stretch along the tracks, to a torsion system, where a spring on a shaft above the door counterbalances it. Torsion is safer, quieter, better balanced, and longer-lasting.
Why is torsion better than extension?
+
Torsion springs stay contained on their shaft when they fail, rather than flying across the garage like a broken extension spring can, so they are safer. They also run quieter, balance the door more precisely, last longer, and are easier to service and upgrade.
Can any door be converted to torsion?
+
Most can, provided there is enough headroom above the opening for the torsion shaft. Where headroom is tight, a low-headroom torsion kit can often still work. We measure the clearance and confirm the fit before we provide a quote.
Do you convert Wayne Dalton TorqueMaster systems?
+
Yes. The TorqueMaster encloses the spring in a tube, which can make it harder and pricier to service. We can repair a TorqueMaster or convert it to a standard exposed torsion system that is easier and cheaper to maintain going forward.
Is a conversion worth it, or should I just replace the springs?
+
It depends on your door and goals. If the door is in good shape and you want the safety, quiet, and longevity of torsion, the conversion is worthwhile. If the door itself is also worn out, a whole new door with a modern torsion system may be better value. We will tell you which way the math points.
How much does a conversion cost?
+
Because a conversion adds the torsion shaft, bearings, drums, and cables, it is quoted by your door and set up after a free on-site assessment rather than based on a flat price. You approve the written estimate before we start, and financing is available on larger jobs.
Will the converted door be quieter?
+
Usually noticeably so. A torsion system runs more smoothly and evenly than extension springs, which tend to be jerkier and noisier, so most homeowners hear a real difference after the conversion.
Do you size and balance the new springs?
+
Yes. As with any spring work, we weigh the door and size the torsion springs to its exact weight, wind them to balance the door, and run a balance and safety-reverse test before we leave.
Ready to Convert to a Safer Torsion System?
Tell us about your door and whether it uses extension springs or a TorqueMaster system, and we will assess the headroom, lay out your options, and give you a firm quote for a safer, quieter, longer-lasting torsion setup.
We also handle the related spring and hardware work, including Garage door spring replacement, High-cycle garage door springs, Cable & drum repair, Garage door tune-up & maintenance, and All repair services. Extension-to-torsion spring conversions by your local Cedar Park team. Call (512) 516-3718 for a free assessment.
Emergency service: 24 hours a day, 7 days a week · Standard hours 8 a.m. to 6 p.m. · Calls answered around the clock